Compaq ProLiant 1850R Compaq ProLiant 1850R Setup and Installation Guide - Page 116
Cabling the Server’s Rear Panel Cables, Table 4-2, Important Connectors
View all Compaq ProLiant 1850R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
4-4 Cabling Guidelines Table 4-2 Important Connectors Ref. Connector 1 Floppy Connector 2 Port 2 SCSI Connector (2), It connects to the removable media bay for SCSI hard drives, tape drives, or external SCSI devices via the external connector. 3 IDE Connector 4 Port 1 SCSI Connector, It connects to the Hot-Plug Drive Cage. Cabling the Server's Rear Panel Cables You are now ready to connect the power cord and peripheral devices to the connectors located on the rear panel of the server. Icons on the back of the server identify the function of each connector. Follow the procedure below for instructions on connecting the external cables to the server and then securing those cables to the rack. 1. Plug the cables into the server. Figure 4-3. Cabling the server rear panel cables