Compaq ProLiant 1850R Compaq ProLiant 1850R Setup and Installation Guide - Page 99
Attaching Mass Storage Devices, Installing External Storage Devices
![]() |
View all Compaq ProLiant 1850R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
3-24 Installing Hardware Options Figure 3-25. Installing the CD-ROM from the chassis Attaching Mass Storage Devices Bays A and B can accomodate two half-height or one full height device(s). Devices that can be installed include: an additional CD-ROM drive, 1-inch or 1.6-inch height hard drives, SLR, DAT, or DLT tape drives. Installing External Storage Devices Optional mass storage devices can be connected to the Compaq ProLiant 1850R server by using the external Wide-Ultra SCSI-3 port on the back of the unit. Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay To install a 3.5-inch drive into a 5.25-inch drive bay (Bay A or Bay B): 1. If the server is on, place it in Standby and disconnect the power cord-(s). See to Chapter 2, "Server Installation Overview". 2. Pull the server forward in the rack for access to the inside of the server. 3. Remove the server cover.
![](/manual_guide/products/compaq-1850r-compaq-proliant-1850r-setup-installation-guide-b572d10/99.png)