Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 45
Run Diagnostics., Replace failed assembly
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3-7 POST Error Messages Continued Error Code Audible Beeps L=Long S=Short Probable Source of Problem 301-Keyboard Error None Keyboard failure. Recommended Action Turn off the computer, then reconnect the keyboard. 301-Keyboard Error or None Keyboard failure. Test Fixture Installed Replace the keyboard. ZZ-301-Keyboard Error None Keyboard failure. (ZZ represents 1. A key is stuck. Try to free it. the Keyboard 2. Replace the keyboard. Scan Code.) 303-Keyboard Controller Error None System board, keyboard, or 1. Run Diagnostics. mouse controller failure. 2. Replace failed assembly as indicated. 304-Keyboard or System Unit Error None Keyboard, keyboard cable, or 1. Make sure the keyboard is attached. system board failure. 2. Run Diagnostics to determine which is in error. 3. Replace the part indicated. 40X-Parallel Port X Address Assignment Conflict 2S Both external and internal ports Run the System Configuration Utility are assigned to parallel port X. and correct. 402-Monochrome Adapter Failure 1L, 2S Monochrome display controller. Replace the monochrome display controller. 501-Display Adapter Failure 601-Diskette Controller Error 1L, 2S None Video display controller. Diskette controller circuitry failure. Replace the video board. 1. Make sure the diskette drive cables are attached. 2. Replace the diskette drive and/or cable. 3. Replace the system board. 605-Diskette Drive Type Error 2S Mismatch in drive type. Run the System Configuration Utility to set diskette type correctly. 702-A coprocessor has been detected that was not reported by CMOS None Installed coprocessor not Run the System Configuration Utility configured. and correct. Continued Compaq ProLiant 800 Servers Maintenance and Service Guide