Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 95
Compaq System Configuration Utility r Settings, for Booting into Compaq Utilities, r Data
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
3-57 Compaq System Configuration Utility Pager Settings for Booting into Compaq Utilities Continued Pager Data Setting Description Dial-out status Enabled Allows ASR-2 to dial out to a remote workstation. If you selected this option, Dial-In Status is automatically selected. To use the dial-out feature, set Dial-Out Status to Enabled and set the Dial-Out String to the correct phone number. You must also set the Reset Boot option to Boot Compaq Utilities. When the system restarts because of an ASR reset, the administrator is paged via Pager Status and Pager Dial String, the system restarts to the Compaq Utilities, and dials out to the phone number provided in the Dial-Out string. The dial-out number will be tried five times. If it fails to connect after five attempts, the modem is put in auto-answer mode. Dial-out string 555-1234 Enter the dial string followed by the remote computer telephone number. Network status Enabled To allow network access to Compaq Utilities, set Network Status to Enabled and make sure the Reset Boot option is set to Boot Compaq Utilities. Network protocol To use IPX network access, set Network Protocol to IPX. When the system restarts to the Compaq Utilities because of an ASR reset, it loads IPX network support. This enables remote access via NVT. To use IP network access, set Network protocol to IP. Also make sure to set Network IP address, Network IP net mask, and Network IP router address. When the system restarts to the Compaq Utilities because of an ASR reset, it loads IP network support. This enables remote access via Telnet. NOTE: The Network Status must be set to Enabled for network access. Network controller Compaq For all Compaq Standard Network Controllers. Network host name CPQHOU Enter the network name of the server. Use underscores instead of spaces within the name, for example, Compaq_Server. If you are using IPX network access to the Compaq Utilities, this server name is used to advertise NVT host services. This server name displays in the Compaq Insight Manager server list when it determines it can communicate via NVT. Set this name to be the same as the server name you assign when the host OS is running. Network card slot Slot # Select the slot number of the network interface card you wish to use for network access to Compaq Utilities. Network frame type ETHERNET_I I Select the frame type for your network. Selections include both Ethernet and Token Ring topologies. Continued Compaq ProLiant 800 Servers Maintenance and Service Guide