Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 46
Run the System Configuration, Utility and correct., Replace the coprocessor. - error 1611
![]() |
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3-8 Diagnostic Tools POST Error Messages Continued Error Code Audible Beeps L=Long S=Short Probable Source of Problem 703-CMOS reports a 2S Coprocessor or configuration coprocessor that has error. not been detected Recommended Action 1. Run the System Configuration Utility and correct. 2. Replace the coprocessor. 1151-Com Port 1 Address Assignment Conflict 2S Both external and internal serial Run the System Configuration Utility ports are assigned to COM1. and correct. 1152-Com Port 2, 3, or 4 Address Assignment Conflict 2S Both external and internal serial Run the System Configuration Utility ports are assigned to COM2, and correct. COM3 or COM4. 1600-Server Manager/R Failure None Server Manager/R board failure. Run Diagnostics. Replace failed Error code displays after error assembly as indicated. message. 1610-Temperature violation detected. Waiting for system to cool 2S Ambient system temperature Check fan in system environment. too hot. 1611-Fan [fan description] failure detected 2S Required fan has failed. Check fans. 1611- Fan [fan description] not present 2S Fan not present. Make sure fans are plugged in. 1612-Primary power 2S Primary power supply supply failure has failed. Replace power supply as soon as possible. 1613-Low System Battery None Real time clock system battery Run Diagnostics. Replace failed is running low on power. assembly as indicated. 1615- Power Supply Failure in Bay X None A power supply has failed. Replace or check specified power supply. 1616- Power Supply Configuration Error 2L, 2S Single power supply system is installed in Bay 2 and not in Bay 1. Move power supply from Bay 2 to Bay 1. 1701-SCSI Controller None A test on the Fast SCSI-2 failure Controller failed Run Diagnostics. Replace failed assembly as indicated. Continued
![](/manual_guide/products/compaq-proliant-800-proliant-800-servers-supporting-pentium-ii-processors-100-mhz-bus-maintenance-service-guide-13a6d03/46.png)