D-Link 1824i User Guide - Page 43
Using the Console Interface, Connecting to the Hub
UPC - 790069210358
View all D-Link 1824i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
10BASE-T Stackable Hubs 6 6 USING THE CONSOLE INTERFACE Your Intelligent stackable Ethernet hub supports a console management interface that allows you to set up and control your hub, either with an ordinary terminal (or terminal emulator), or over the network using the TCP/IP Telnet protocol. You can use this facility to perform many basic network management functions. In addition, the console program will allow you to set up the hub for management using SNMP-View or another SNMPbased network management system. This chapter describes how to use the console interface to access the hub, change its settings, and monitor its operation. Connecting to the Hub You can use the console interface by connecting the hub to a VT100compatible terminal or a computer running an ordinary terminal emulator program (e.g., the terminal program included with the Windows operating system) using an RS-232C serial cable. Your terminal parameters will need to be set to: ♦ VT-100/ANSI compatible ♦ Arrow keys enabled ♦ 9600 baud Using the Console Interface 6-1