D-Link 1824i User Guide - Page 76
Can't Erase Flash Memory, Flash Memory Programming Error
UPC - 790069210358
View all D-Link 1824i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
10BASE-T Stackable Hubs Duplicate IP address detected ◊ F Invalid IP address or subnet mask 1. TFTP Download (Port 3 Frame/Port 9 Frame) The hub uses the TFTP protocol to load its boot configuration file, and optionally the run-time image. This step is omitted if the hub is configured to not use TFTP. Error codes in this step include: ◊ 1 System configuration file download error ◊ 2 Illegal configuration file name ◊ 3 Runtime image download error ◊ D Can't perform out-of-band download when console mode is specified 1. Erase Flash Memory (Port 4 Frame/Port 10 Frame) If a new image file was downloaded, the hub needs to erase the flash memory in preparation for storing the image. Error codes in this step include: ◊ 1 Can't Erase Flash Memory 1. Write Flash Memory (Port 5 Frame/Port 11 Frame) If a new image file was downloaded, the hub needs to write the new image into the hub's flash memory. Error codes in this step include: ◊ 1 Flash Memory Programming Error 1. Download Image from Flash (Port 6 Frame/Port 12 Frame) The hub reads the runtime image from its flash memory and stores it in B-4 Power-On Self Test