D-Link 1824i User Guide - Page 54

SNMP Traps

Get D-Link 1824i - Hub - EN PDF manuals and user guides
UPC - 790069210358
View all D-Link 1824i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

10BASE-T Stackable Hubs The System Configuration Menu also contains the Console/Telnet Display Timeout parameter, which determines how long the console may sit idle before the user is "logged out." SNMP Traps The hub sends out SNMP traps to network management stations whenever certain exceptional events occur, such as when the hub is powered on or when an SNMP request is made using an unknown community name. The hub allows traps to be routed to up to four different network management hosts. Figure 6 -8 SNMP Trap Manager Menu The following trap parameters can be set: ♦ IP Address: gives the IP address of the network management station to receive the trap ♦ SNMP Community String: determines the SNMP community name to be included in the trap request. 6-12 Using the Console Interface

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
10BASE-T Stackable Hubs
The System Configuration Menu also contains the Console/Telnet Display
Timeout parameter, which determines how long the console may sit idle
before the user is “logged out.”
SNMP Traps
The hub sends out SNMP
traps
to network management stations whenever
certain exceptional events occur, such as when the hub is powered on or
when an SNMP request is made using an unknown community name. The
hub allows traps to be routed to up to four different network management
hosts.
Figure 6 -8
SNMP Trap Manager Menu
The following trap parameters can be set:
♦
IP Address:
gives the IP address of the network management station
to receive the trap
♦
SNMP Community String:
determines the SNMP community name
to be included in the trap request.
6-12
Using the Console Interface