D-Link 1824i User Guide - Page 80
syslocation, baud-rate, snmpt-image, ip-netmask, ip-default, auth-trap, string, address
UPC - 790069210358
View all D-Link 1824i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
10BASE-T Stackable Hubs contact information for the person responsible for administering the hub. The string can be up to 64 characters long. ♦ syslocation string Takes string as the System Location, corresponding to the SNMP MIB II variable sysLocation. This field is used to indicate the physical location of the hub for administrative purposes. The string can be up to 64 characters long. ♦ baud-rate n Sets the console port transmission rate used when the port is being used in out-of-band mode. Legal values for the parameter n are: 1200, 2400, 9600, and 19200. ♦ snmpt-image string Takes string (which may be up to 64 characters long) as the filename on the TFTP server of the image file to be used. When the hub boots, it will load the given image file from the server and execute it. This command may be used to update the hub's software when a new version is available from SNMP. ♦ ip-netmask mask Uses mask as the network mask for the local network. The mask should be in the form xxx.xxx.xxx.xxx, where each xxx is a number between 0 and 255. For a class C network with no subnetting, the netmask should be 255.255.255.0. ♦ ip-default address Uses address as the hub's IP address. The address should be in the form xxx.xxx.xxx.xxx, where each xxx is a number between 0 and 255. ♦ auth-trap enable/disable C-2 Boot Configuration File