D-Link DES-3550 Product Manual - Page 109
Access Profile Table window, Access Profile Configuration window Ethernet
UPC - 790069266317
View all D-Link DES-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
xStack® DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Figure 6- 62. Access Profile Table window All free ACL rules will be listed in the Free ACL Rules Table as above. To add an entry to the Access Profile Table, click the Add button. This will open the Access Profile Configuration window, as shown below. There are three Access Profile Configuration windows; one for Ethernet (or MAC address-based) profile configuration, one for IP address-based profile configuration and one for the Packet Content Mask. You can switch between the three Access Profile Configuration windows by using the Type drop-down menu. To clear all access profiles, click Clear All button on the above window. The window shown below is the Access Profile Configuration window for Ethernet. Note: Up to nine Access Profiles of the possible 255 profile IDs available may be created for the Switch. The Profile ID is used for relative priority for an Access Profile should a conflict arise between a rule created in one profile and a rule created in a different profile. Please read the CLI Reference Manual chapter discussing Access Control List (ACL) Commands. Figure 6- 63. Access Profile Configuration window (Ethernet) The following parameters can be set, for the Ethernet type: Parameter Description Profile ID (1-255) Type in a unique identifier number for this profile set. The number is used to set the relative priority for the profile. Priority is set relative to other profiles where the lowest profile ID has the highest priority. If a conflict occurs among configured access rules, the profile ID establishes relative priority of the rules. The value can be set from 1 to 255 however there is 94