D-Link DES-3550 Product Manual - Page 148
Layer 3 IP Networking, Static ARP Table
UPC - 790069266317
View all D-Link DES-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
xStack® DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Layer 3 IP Networking Static ARP Table The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. This table allows network managers to view, define, modify and delete ARP information for specific devices. Static entries can be defined in the ARP Table. When static entries are defined, a permanent entry is entered and is used to translate IP addresses to MAC addresses. To open the Static ARP Table click, Configuration > Layer 3 IP Networking > Static ARP Settings. Figure 6- 115. Static ARP Settings window To add a new entry, click the Add button, the following window will be displayed: Figure 6- 116. Static ARP Table - Add a New Entry window To modify an entry, click the Modify button, the following window will be displayed: Figure 6- 117. Static ARP Table - Modify The following fields can be set: Parameter Description IP Address MAC Address The IP address of the ARP entry. The MAC address of the ARP entry. After entering the IP Address and MAC Address of the Static ARP entry, click Apply to implement the new entry. To completely clear the Static ARP Settings, click the Clear All button. NOTE: The Switch supports up to 255 static ARP entries. 133