D-Link DES-3550 Product Manual - Page 209
SNMP Engine ID, SNMP Trap, SNMP Host Table Configuration window
UPC - 790069266317
View all D-Link DES-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
xStack® DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Figure 7- 54. SNMP Host Table Configuration window The following parameters can set: Parameter Description Host IP Address Type the IP address of the remote management station that will serve as the SNMP host for the Switch. SNMP Version V1 - To specifies that SNMP version 1 will be used. V2 - To specify that SNMP version 2 will be used. V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv security level. V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level. V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Community String/SNMP User Name Type in the community string or SNMP V3 user name as appropriate. V3 To implement your new settings, click Apply. To return to the SNMP Host Table, click the Show All SNMP Host Table Entries link. SNMP Engine ID The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify the SNMP engine on the Switch. To display the Switch's SNMP Engine ID, click Security Management > SNMP Manger > SNMP Engine ID. This will open the SNMP Engine ID Configuration window, as shown below. Figure 7- 55. SNMP Engine ID Configuration window To change the Engine ID, type the new Engine ID in the space provided and click the Apply button. SNMP Trap The following window is used to enable or disable trap settings for the SNMP function on the Switch. To view this window for configuration, click Security Management > SNMP Manger > SNMP Trap. 194