D-Link DES-3550 Product Manual - Page 203
SNMP User Table, Security Management, SNMP Manager, SNMP User Table Display
UPC - 790069266317
View all D-Link DES-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
xStack® DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual SNMP User Table The SNMP User Table displays all of the SNMP User's currently configured on the Switch. To view this window click, Security Management > SNMP Manager > SNMP User Table. Figure 7- 44. SNMP User Table window To delete an existing SNMP User Table entry, click the button under the Delete heading corresponding to the entry you wish to delete. To display the detailed entry for a given user, click on the hyperlinked User Name. This will open the SNMP User Table Display window, as shown below. Figure 7- 45. SNMP User Table Display window The following parameters are displayed: Parameter Description User Name Group Name SNMP Version Auth-Protocol Priv-Protocol An alphanumeric string of up to 32 characters. This is used to identify the SNMP users. This name is used to specify the SNMP group created can request SNMP messages. V1 - Indicates that SNMP version 1 is in use. V2 - Indicates that SNMP version 2 is in use. V3 - Indicates that SNMP version 3 is in use. None - Indicates that no authorization protocol is in use. MD5 - Indicates that the HMAC-MD5-96 authentication level will be used. SHA - Indicates that the HMAC-SHA authentication protocol will be used. None - Indicates that no authorization protocol is in use. DES - Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-56) standard. To return to the SNMP User Table, click the Show All SNMP User Table Entries link. To add a new entry to the SNMP User Table Configuration window, click on the Add button on the SNMP User Table window. This will open the SNMP User Table Configuration window, as shown below. 188