D-Link DES-3550 Product Manual - Page 198
SSH Algorithm, Apply, Security, Management > Secure Shell SSH > SSH Algorithm
UPC - 790069266317
View all D-Link DES-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
xStack® DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Figure 7- 40. Current SSH Configuration Settings To configure the SSH server on the Switch, modify the following parameters and click Apply: Parameter Description SSH Server Status Max Session (1-8) Time Out (120-600) Auth. Fail (2-20) Session Rekeying Port(1-65535) Use the pull-down menu to enable or disable SSH on the Switch. The default is Disabled. Enter a value between 1 and 8 to set the number of users that may simultaneously access the Switch. The default setting is 8. Allows the user to set the connection timeout. The use may set a time between 120 and 600 seconds. The default setting is 300 seconds. Allows the Administrator to set the maximum number of attempts that a user may try to log on to the SSH Server utilizing the SSH authentication. After the maximum number of attempts has been exceeded, the Switch will be disconnected and the user must reconnect to the Switch to attempt another login. The number of maximum attempts may be set between 2 and 20. The default setting is 2. Using the pull-down menu uses this field to set the time period that the Switch will change the security shell encryptions. The available options are Never, 10 min, 30 min, and 60 min. The default setting is Never. Enter the ports for the SSH Configuration. SSH Algorithm The SSH Algorithm window allows the configuration of the desired types of SSH algorithms used for authentication encryption. There are four categories of algorithms listed and specific algorithms of each may be enabled or disabled by using their corresponding pull-down menus. All algorithms are enabled by default. To open the following window, click Security Management > Secure Shell (SSH) > SSH Algorithm: 183