D-Link DGS-3630-52PC Quick installation Guide - Page 105

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Local Relay VLAN, as shown below: Figure 4-65 DHCPv6 Local Relay VLAN Window The fields that can be configured are described below: Parameter DHCPv6 Local Relay VID List State Description Enter the DHCPv6 local relay VLAN ID(s) here. More than one VLAN ID can be entered here. Select the All VLANs option to apply this setting on all configured VLANs on this Switch. Select to enable or disable the DHCPv6 local relay feature on the specified VLAN(s) here. Click the Apply button to accept the changes made. NOTE: When the state of the DHCPv6 relay port is disabled, the port will not relay or locally relay received DHCPv6 packets. DHCP Auto Configuration This window is used to display and configure the DHCP auto-configuration function. To view the following window, click Management > DHCP Auto Configuration, as shown below: Figure 4-66 DHCP Auto Configuration Window The fields that can be configured are described below: Parameter Auto Configuration State Description Select this option to enable or disable the auto-configuration function. Click the Apply button to accept the changes made. DHCP Auto Image Settings This window is used to display and configure the DHCP auto-image settings. During the start-up time of a Switch, this function provides the capability of obtaining the image file form an external TFTP server whose IP address and file name is carried in the DHCP OFFER message received from the DHCP server. The system then uses this image file as the boot-up image. When the system boots up and the auto-image function is enabled, the Switch becomes a DHCP client automatically. 93