D-Link DGS-3630-52PC Quick installation Guide - Page 578

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the Edit button, the following page will appear. Figure 10-7 CFM Settings (Add MA, Add MEP, MEPID Detail, Edit) Window The fields that can be configured are described below: Parameter MEP State CCM State PDU Priority Fault Alarm Description Select to enable or disable the MEP state on the interface here. Select to enable or disable the CCM state here. Select the PDU priority value here. The range is from 0 to 7. This feature is used to define the 802.1p priority that is set in the CCM and other CFM PDUs transmitted by the MEP. Select the type of defects whose fault alarms can be sent by this MEP. Options to choose from are None, All, MAC-Status, Remote-CCM, Error-CCM, and XCONCCM. • None - Specifies that no fault alarm will be sent. • All - Specifies that the fault alarms can be sent for all types of defects. • MAC-Status - Specifies that the fault alarms can be sent for the defects whose priority is equal to or higher than DefMACstatus. • Remote-CCM - Specifies that the fault alarms can be sent for the defects whose priority is equal to or higher than DefRemoteCCM. • Error-CCM - Specifies that the fault alarms can be sent for the defects whose priority is equal to or higher than DefErrorCCM. 566