D-Link DGS-3630-52PC Quick installation Guide - Page 117

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in IP FTP Source Interface are described below: Parameter Source Interface State Interface Type Interface ID Description Select to enable or disable the IP FTP source interface state here. After enabling the Source Interface State option, select the interface type here. Options to choose from are Loopback, Mgmt, and VLAN. Enter the interface ID here. For loopback interfaces, this value is from 1 to 8. For the management interface (Mgmt), this value can only be 0. For VLAN interfaces, this value is from 1 to 4094. Click the Apply button to accept the changes made. The fields that can be configured in IP RCP Source Interface are described below: Parameter Source Interface State Interface Type Interface ID Description Select to enable or disable the IP RCP source interface state here. After enabling the Source Interface State option, select the interface type here. Options to choose from are Loopback, Mgmt, and VLAN. Enter the interface ID here. For loopback interfaces, this value is from 1 to 8. For the management interface (Mgmt), this value can only be 0. For VLAN interfaces, this value is from 1 to 4094. Click the Apply button to accept the changes made. File System This window is used to view, manage and configure the Switch file system. To view the following window, click Management > File System, as shown below: Figure 4-81 File System Window The fields that can be configured are described below: Parameter Unit Path Description Select the Switch unit that will be used for this configuration here. Enter the path string. Click the Go button to navigate to the path entered. Click the Copy button to copy a specific file to the Switch. Click the c: hyperlink to navigate the C: drive 105