D-Link DGS-3630-52PC Quick installation Guide - Page 397

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description • In - Specifies the filter list applied to paths advertised from the neighbor. • Out - Specifies the filter list applied to paths to be advertised to the neighbor. Prefix List Action Prefix List Name Capability ORF Prefix List Action Capability ORF Prefix List Type Select the prefix list action here. Options to choose from are Add and Delete. Enter the name of the prefix list here. This name can be up to 32 characters long. Select to enable or disable the ORF prefix list capability feature here. The BGP ORF capability can be used to reduce the number of prefixes exchanged with the peer. Typically, this must be configured in pairs on the local router and the remote router. This function can operate in one direction or in both directions. Select the capability ORF prefix list type here. Options to choose from are Receive, Send, and Both Click the Apply button to accept the changes made. After clicking the Please Select button, the following page will appear. Figure 6-199 Neighbor Filter Settings (Please Select) Window Select the VRF entry and click the OK button to use the selected VRF entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Neighbor Maximum Prefix Settings This window is used to display and configure the BGP neighbor maximum prefix settings. This is used to control the maximum number of prefixes that can be accepted from a BGP neighbor. To view the following window, click L3 Features > BGP > BGP Neighbor > Neighbor Maximum Prefix Settings, as shown below: Figure 6-200 Neighbor Maximum Prefix Settings Window 385