D-Link DGS-3630-52PC Quick installation Guide - Page 513

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in RADIUS Server Attribute Settings are described below: Parameter RADIUS Server Attribute NAS-IP-Address Description Enter the RADIUS server's attribute NAS-IP-Address here. Click the Apply button to accept the changes made. RADIUS Server Settings This window is used to display and configure the RADIUS server settings. To view the following window, click Security > RADIUS > RADIUS Server Settings, as shown below: Figure 9-30 RADIUS Server Settings Window The fields that can be configured are described below: Parameter IP Address IPv6 Address Authentication Port Accounting Port Retransmit Timeout Key Type Key Description Enter the RADIUS server IPv4 address here. Enter the RADIUS server IPv6 address here. Enter the authentication port number used here. This value must be between 0 and 65535. By default, this value is 1812. If no authentication is used, use the value 0. Enter the accounting port number used here. This value must be between 0 and 65535. By default, this value is 1813. If no accounting is used, use the value 0. Enter the retransmit value used here. This value must be between 0 and 20. By default, this value is 3. To disable this option, enter the value 0. Enter the timeout value used here. This value must be between 1 and 255 seconds. By default, this value is 5 seconds. Select the key type that will be used here. Options to choose from are Plain Text and Encrypted. Enter the key, used to communicate with the RADIUS server, here. This key can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. RADIUS Group Server Settings This window is used to display and configure the RADIUS group server settings. 501