D-Link DGS-3630-52PC Quick installation Guide - Page 584

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter LBM Payload Pattern PDU Priority Description Select and enter the LBM payload pattern here. This specifies an arbitrary amount of data to be included in a Data TLV, along with an indication whether the Data TLV is to be included. This string can be up to 1500 characters long. No spaces are allowed. Select the 802.1p priority to be set in the transmitted LBMs here. If not specified, it uses the same priority as the CCMs sent by the MA. The range is from 0 to 7. Select the None option to use the default setting. Click the Apply button to accept the changes made. CFM Linktrace Settings This window is used to display and configure the CFM link-trace settings. To view the following window, click OAM > CFM > CFM Linktrace Settings, as shown below: Figure 10-15 CFM Linktrace Settings Window The fields that can be configured in CFM Linktrace Settings are described below: Parameter MAC Address MEPID MA Name Domain Name TTL PDU Priority Description Enter the destination MAC address here. Enter the MEP ID here used to initiate the link-trace feature. The range is from 1 to 8191. Enter the MA name here. The name can be up to 22 characters long. Enter the MD name here. The name can be up to 22 characters long. Enter the link-trace message's TTL value here. The range is from 2 to 255. The default value is 64. Select the 802.1p priority to be set in the transmitted LBMs here. If not specified, it uses the same priority as the CCMs sent by the MA. The range is from 0 to 7. Select the None option to use the default setting. Click the Apply button to accept the changes made. The fields that can be configured in Find and Clear CFM Linktrace are described below: Parameter MEPID Description Enter the MEP ID here. The range is from 1 to 8191. 572