D-Link DGS-3630-52PC Quick installation Guide - Page 615

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the Binding FECs Settings tab, the following page will appear. Figure 11-22 MPLS QoS Settings (Edit, Binding FECs Settings) Window The fields that can be configured are described below: Parameter IP Mask VC VC ID Description Enter the FEC IP address here. Use this feature to apply an MPLS QoS policy to FECs. The QoS policy will be applied to all MPLS packets of the FEC. A FEC can only be bound to at most one policy. Enter the FEC subnet mask here. Enter the FEC VC address here. Enter the FEC VC ID here. Click the Apply button to accept the changes made. Click the Delete button to remove an entry based on the information selected/entered. Click the Delete All button to remove all the entries associated with this feature. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Click the Back button to return to the previous window. Ping MPLS This window is used to check the connectivity of the LSP for the specified FEC. If there is no LSP for the specified FEC, the "Destination unreachable" message will be displayed. Otherwise, MPLS echo request messages will be sent out to along with the LSP of the specified FEC. If the egress LSR received the request message, it will reply the request message sender with an MPLS echo reply message. If the sender cannot receive replies before the timeout, the "Request timed out" message will be displayed. 603