D-Link DGS-3630-52PC Quick installation Guide - Page 402

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L3 Features > BFD > BFD Settings, as shown below: Figure 6-204 BFD Settings Window The fields that can be configured in BFD State are described below: Parameter BFD State Description Select to globally enable or disable the BFD feature here. Click the Apply button to accept the changes made. The fields that can be configured in BFD Interface Settings are described below: Parameter Interface VLAN Description Enter the ID of the VLAN interface that will be used here. Click the Find button to find and display an entry based on the information entered. Click the Edit button to configure the interval settings for the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Edit button, the fields that can be configured are described below: Parameter MinTxInt MinRxInt Multiplier Slow Time Description Enter the minimum time interval value that the local system will use when transmitting BFD control packets here. The range is from 50 to 1000 milliseconds. Enter the minimum time interval value between received BFD control packets that this system is capable of supporting here. The range is from 50 to 1000 milliseconds. Enter the BFD detection time multiplier value here. The range is from 3 to 99. Enter the BFD slow time value here. The range is from 1000 to 3000 milliseconds. Click the Apply button to accept the changes made. BFD Neighbor Table This window is used to view the BFD neighbor table. NOTE: Performance will vary depending on the configuration and traffic patterns. It is advised to perform lab testing before deploying BFD in a live environment. 390