D-Link DGS-3630-52PC Quick installation Guide - Page 47

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Synchronization Interval Description Enter the synchronization interval value here. This specifies the mean-time interval between successive synchronization messages. In line with the IEEE 1588 protocol, this value must be represented as the logarithm to the base of 2 of this time, measured in seconds. The range is from 1 to 2 seconds. Select the Half Second option to set 0.5 seconds as this value. Click the Apply button to accept the changes made. PTP P2P Transparent Port Settings This window is used to display and configure the peer delay request message interval on the P2P transparent clock port(s) specified. To view the following window, click System > PTP (Precise Time Protocol) > PTP P2P Transparent Port Settings, as shown below: Figure 3-32 PTP P2P Transparent Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port P2P Transparent Pdelay Request Interval Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Enter the P2P transparent peer delay request interval value here. The range is from 1 to 32. Click the Apply button to accept the changes made. PTP Clock Information This window is used to view PTP clock information. This is used to display the active attributes of the PTP clock. 35