D-Link DGS-3630-52PC Quick installation Guide - Page 50

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide NOTE: When an active console connection is made to both the RJ45 console port and the mini-USB console port at the same time, the mini-USB console port will have higher priority. SRM The Switch Resource Management (SRM) feature provides a large number of resources that can be distributed and optimized as needed by applications. It provides resource configuration flexibility that allows users to allocate more resources for tables that require more entries and prevents wasting resources on unused functions. SRM Prefer Current Settings This window is used to display and configure the SRM settings. This window is used to specify the SRM mode to be used on the Switch for optimizing resources for various functions. To view the following window, click System > SRM > SRM Prefer Current Settings, as shown below: Figure 3-37 SRM Prefer Current Settings Window The fields that can be configured are described below: Parameter SRM Prefer Mode Description Select the SRM prefer mode here. Options to choose from are: • LAN - Specifies that the Switch prefers the LAN Switch mode. • IP - Specifies that the Switch prefer the IP route mode. • L2VPN - Specifies that the Switch prefer the Layer 2 VPN mode. Click the Apply button to accept the changes made. NOTE: When the SRM mode was modified and the Switch was rebooted, the table size will be changed. If the number of static entries saved in the startup configuration exceeds the number of static entries in the new table size, the exceeded number of entries will be removed. NOTE: When Switches are physically stacked, ensure that all Switches in the stack are configured to use the same SRM mode. SRM Prefer Mode This window is used to view the SRM preferred mode settings. The entries in this table are fixed values indicating the maximum number of entries allowed per feature. 38