D-Link DGS-3630-52PC Quick installation Guide - Page 407

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter SPF Interval Level-2 VRF Name Description Select the Default option to use the default value. Enter the SPF interval level-2 value here. This is used to customize ISIS throttling of SPF calculations applied to level-2 areas only. The range is from 1 to 120 seconds. Select the Default option to use the default value. Click the Please Select button to select a pre-configured VRF instance that will be used here. Select the No VRF option to specify that no VRF instance will be used here. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. After clicking the Please Select button, the following page will appear. Figure 6-209 ISIS Global Settings (Please Select) Window Select the VRF entry and click the OK button to use the selected VRF entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the NET List button, the following page will appear. Figure 6-210 ISIS Global Settings (NET List) Window The fields that can be configured are described below: Parameter NET Description Enter the NET Network Services Access Point (NSAP) address here. An Intermediate System (IS) is identified by an address known as the NSAP. The NSAP is divided up into three parts as specified by ISO 10589. A NET is an NSAP where the last byte is always the n-selector and is always zero. A NET can be from 8 to 20 bytes in length. Multiple NETs can be configured to merge or split areas. This implementation is just for IP routing only, so the NET must be configured to define the system ID and area ID. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. Click the Delete button to remove the specific entry. 395