D-Link DGS-3630-52PC Quick installation Guide - Page 378

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description • L2VPN VPLS - Specifies to use the Layer 2 VPN VPLS address family. • VPNv4 - Specifies to use the VPNv4 address family. • IPv6 Unicast - Specifies to use the IPv6 unicast address family in this configuration. Neighbor This is used to assign the specified neighbor as its client. Options to choose from are: • IPv4 Address - Select and enter the IPv4 address of the neighboring router here. • Peer Group - Select and enter the peer group name that will act as the route reflector client here. • IPv6 Address - Select and enter the IPv6 address of the neighboring router here. State Select to enable or disable the BGP reflector client state here. Click the Apply button to accept the changes made. BGP Confederation Settings This window is used to display and configure the BGP confederation settings. To view the following window, click L3 Features > BGP > BGP Confederation Settings, as shown below: Figure 6-176 BGP Confederation Settings Window The fields that can be configured are described below: Parameter Confederation Identifier Confederation Peer Description Enter the BGP confederation ID here. The range is from 0 to 4294967295. Select to Add or Delete a BGP confederation peer here. Enter the BGP confederation peer ID here. The range is from 1 to 4294967295. Click the Apply button to accept the changes made. BGP AS Path Access List Settings This window is used to display and configure the BGP AS path access list settings. 366