D-Link DIR-685 User Manual - Page 103
Con WPA/WPA2 (EAP
UPC - 790069321900
View all D-Link DIR-685 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Section 4 - Security Configure WPA/WPA2 (EAP) It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption.Your wireless signal may degrade when enabling encryption due to the added overhead. You can configure the DIR-685 to use the 802.1x protocol by enabling the Extensible Authentication Protocol (EAP). Carry out the following steps to configure EAP on the DIR-685: 1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Setup on the left side. 2. Click the Manual Wireless Connection Setup button. 3. Next to Security Mode, select Enable WPA/WPA2 Wireless Security (enhanced). 4. Next to Cypher Type, select TKIP, AES, or Both. 5. Next to PSK / EAP select EAP from the drop-down menu. 6. Next to RADIUS Server IP Address, enter the IP address of your RADIUS Server. 7. Enter the port used by your RADIUS Server in the Port field. 8. Enter the Shared Secret used by your RADIUS Server in the Shared Secret field. 9. Click Save Settings to save your settings. D-Link DIR-685 User Manual 98