D-Link DIR-842 User Manual - Page 45
IPv6 in IPv4 Tunnel, Remote IPv4, Address, Local IPv4, Subnet Prefix, Length, DNS Type, Primary DNS
View all D-Link DIR-842 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Section 4 - Configuration IPv6 in IPv4 Tunnel The user can configure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure. Remote IPv4 Enter the IPv4 remote address you will use. Address: Remote IPv6 Enter the IPv6 remote address you will use. Address: Local IPv4 Enter the IPv4 local address you will use. Address: Local IPv6 Enter the IPv6 local address you will use. Address: Subnet Prefix Enter the subnet prefix length supplied by your ISP. Length: DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. Primary DNS If you selected Use the following DNS address above, enter the Server: primary DNS server address. Secondary DNS If you selected Use the following DNS address above, enter the Server: secondary DNS server address. Enable DHCP- Enable or disable prefix delegation services. PD: LAN IPv6 If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the Address: router. D-Link DIR-842 User Manual 41