D-Link DIR-842 User Manual - Page 47
Stateful DHCPv6, SLAAC + RDNSS, SLAAC + Stateless, DHCPv6
View all D-Link DIR-842 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Section 4 - Configuration 6 to 4 In this section the user can configure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling technology that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet. 6 to 4 Address: Displays the 6 to 4 address. 6 to 4 Relay: Enter the 6 to 4 relay supplied by your ISP. Primary DNS Enter the primary DNS server address. Server: Secondary DNS Enter the secondary DNS server address. Server: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: Enable Automatic Check to enable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-842 User Manual 43