D-Link DPH-80 Manual - Page 36
Configuring the SIP Phone, Login to IP Phone - d link ip phone reset
![]() |
View all D-Link DPH-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Using Session Initiated Protocol (SIP) Configuring the SIP Phone Once you have the above infrastructure in place, you can power up the SIP phone. The SIP phone will play a call progress tone and try to register with the SIP proxy server. This operation will fail since the SIP phone is not configured properly and it will play error tone. However, the SIP phone is accessible through an Internet browser for configuration. The SIP phone IP address is required to access the phone through a browser. The SIP phone uses factory default values before configuration and the default IP address is 10.1.1.80 (net mask 255.0.0.0). However, the user can enter an IP address through the keypad immediately after a factory reset as per the format *x*y*z*a*#, where the symbols * and # are mandatory. To access the web interface for the D-Link DPH-80: Use a JavaScript-enabled Internet browser (Netscape 6.2 or above, IE 5.0 or above) with the default IP address of the DPH-80 entered in the address box (http://10.1.1.80). The following page will appear. Login Page to IP Phone 36
![](/manual_guide/products/dlink-dph80-manual-b22aa99/36.png)