D-Link DPH-80 Manual - Page 40
Maximum Buffer Size
![]() |
View all D-Link DPH-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Using Session Initiated Protocol (SIP) Configuration Main Page Firmware Filename (up to 6 characters): This is the filename of the firmware that you want to download from the TFTP server. It may be a maximum of 6 characters long. It should start with a letter and should consist of digits, letters, and an underscore. Upload Filename (up to 6 characters): This is the filename to upload the configuration parameters from the phone to the TFTP server. It may be a maximum of 6 characters long. It should start with a letter and should consist of digits, letters, and an underscore. Download Filename (up to 6 characters): This is the filename to download the configuration parameters from the TFTP server to the phone. It may be a maximum of 6 characters long. It should start with a letter and should consist of digits, letters, and an underscore. Adaptive Jitter: If this is enabled, the Jitter Buffer will be adaptive. Otherwise it will use a fixed buffer of a size specified in Maximum Buffer Size. Maximum Buffer Size: If adaptive jitter is disabled, the phone will use this static value for Jitter Buffer size. This should be in the range of 0-300 in ms. Log Server: This flag is turned on in case the user wants to log all debug messages for viewing. Log Server Address: This has the IP address of the machine where all the log messages should be sent. It must be in dot-separated form. An illegal IP address won't be allowed for this field. Log Server Port: This is the port number on the log server to which the log messages are to be sent. It should be a valid port number in the range of 0-65335. The user should make sure that it is not one of the reserved port numbers. Microphone Gain: This will show the microphone gain in the range of 14 to 14 (units of dB). 40
![](/manual_guide/products/dlink-dph80-manual-b22aa99/40.png)