D-Link DPH-80 Manual - Page 38
Using Session Initiated Protocol SIP, Firmware Version, MAC Address, Country Code
![]() |
View all D-Link DPH-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Using Session Initiated Protocol (SIP) Configuration Main Page General Configuration The items on this page are described below: Firmware Version : This shows the current firmware version of the IP phone. It is updated whenever the SIP phone software is updated. It cannot be modified. Hardware Version: This shows the current hardware version of the IP phone. It cannot be modified. MAC Address: This shows the MAC address of the board in colon-separated hex form. By default the value is ff:ff:ff:ff:ff:ff, once this value is modified it will be grayed out and cannot be changed. Country Code: This is a drop-down menu. Select the appropriate country. This field controls the type of tones played by the SIP phone. 38
![](/manual_guide/products/dlink-dph80-manual-b22aa99/38.png)
38
Configuration Main Page
Using Session Initiated Protocol (SIP)
Firmware Version :
This shows the current firmware version of the IP
phone. It is updated whenever the SIP phone software is updated. It can-
not be modified.
Hardware Version:
This shows the current hardware version of the IP
phone. It cannot be modified.
MAC Address:
This shows the MAC address of the board in colon-sepa-
rated hex form. By default the value is ff:ff:ff:ff:ff:ff, once this value is modified
it will be grayed out and cannot be changed.
Country Code:
This is a drop-down menu. Select the appropriate coun-
try. This field controls the type of tones played by the SIP phone.
General Configuration
The items on this page are described below: