D-Link DPH-80 Manual - Page 67
Log Server Port, Adaptive Jitter
View all D-Link DPH-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Using H.323 Protocol Configuration Main Page TFTP Server: This is the IP address of the host where the TFTP server is running. It must be in dot-separated form. An illegal IP address won't be allowed for this field. Firmware Filename (up to 6 characters): This is the filename of the firmware that you want to download from the TFTP server. It may be a maximum of 6 characters long. It should start with a letter and should consist of digits, letters, and an underscore. Upload Filename (up to 6 characters): This is the filename to upload the configuration parameters from the phone to the TFTP server. It may be a maximum of 6 characters. It should start with a letter and should consist of digits, letters, and an underscore. Download Filename (up to 6 characters): This is the filename to download the configuration parameters from the TFTP server to the phone. It may be a maximum of 6 characters long. It should start with a letter and should consist of digits, letters, and an underscore. Adaptive Jitter: If this is enabled then the Jitter Buffer will be adaptive, otherwise it will use a fixed buffer of a size specified in Maximum Buffer Size. Maximum Buffer Size: If the adaptive jitter is disabled, the phone will use this static value for Jitter Buffer size. This should be in the range of 0-300 in ms. Log Server: This flag is turned on in case the user wants to log all debug messages for viewing. Log Server Address: This is the IP address of the machine where all the log messages should be sent. It must be in dot-separated form. An illegal IP address won't be allowed for this field. Log Server Port: This is the port number on the log server to which the log messages are sent. It should be a valid port number in the range of 065335. The user should make sure that it is not one of the reserved port numbers. 67