D-Link DPH-80 Manual - Page 63
The following will appear.
View all D-Link DPH-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Using H.323 Protocol Configuring the H.323 Phone D-Link H.323 phones supports a feature where you can restart the H.323 phone with factory defaults. This is useful if you want to configure the H.323 phone through the browser and you don't have the H.323 phone's IP address. This feature updates the configurable parameters to default values. Note: The factory defaults can't be modified after being burned to flash unless the flash is reprogrammed. Thus the factory should burn the correct MAC address to factory defaults. The software will not work if the MAC chip is other than DL-10022A. To access the web interface for the D-Link DPH-80: Use a JavaScript-enabled Internet browser (Netscape 6.2 or above, IE 5.0 or above) with the default IP address of the DPH-80 entered in the address box (http://10.1.1.80). The following page will appear. Login Page 63