D-Link DVC-1000 Product Manual - Page 16
Using the DVC-1000 continued - videophone
UPC - 790069254338
View all D-Link DVC-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Using the DVC-1000 (continued) If a Status Icon is displayed, this indicates the operation the icon represents is not complete. The i2eye Update Status Icon appears at startup. While the icon appears, the DVC-1000 is quickly determining if auto-update is enabled. If it is enabled, the DVC-1000 will determine if an update exists. When this is complete, the icon disappears. If the DVC-1000 cannot connect to the update server, the operation was unsuccessful and the the icon will show as: Typically, this means the DVC-1000 is not connected to the Internet. The Public IP Status Icon, appears during startup when the DVC-1000 is attempting to connect to the Internet and determine the Public IP address of your Internet connection. If this operation is unsuccessful and the icon shows. as, the DVC-1000 cannot be used over the Internet. It may still be used on an internal network as an internal videoconferencing system. The Directory Service Status Icon is displayed at startup, showing the. DVC-1000 is registering with the i2eye Directory Service to allow phone number dialing. If the Directory Service cannot be reached, the icon appears. This means you cannot use phone numbers to call other VideoPhones, but you can still make VideoPhone calls by inputting the IP address of the videophone that you are calling. (See Entering IP addresses on page 23.) For help, see the Troubleshooting section starting on page 48 if any of the Status Icons show an unsuccessful operation has occurred. 16