D-Link DVC-1000 Product Manual - Page 9

Using the On-Screen Keyboard The DVC-1000 uses a keyboard that appears on-screen to enter text into the Setup Wizard screens. When the cursor is located in a setup screen that requires characters to be entered, press the ENTER key to bring up the. on-screen keyboard. The keyboard will only appear if the cursor is located in an area of the screen that allows text or numbers to be entered. To enter text use the arrow keys on the remote control to move the cursor to the required character. Press the ENTER key on the remote control to put the. character on the screen. Continue entering characters until you have "typed" the characters that are needed. When you are finished entering text and numbers, move the cursor to highlight OK on the keyboard and press ENTER; or alternatively you can press the CANCEL key on the remote to remove the keyboard from the screen, leaving what you typed on the screen. The keyboard allows entering any of the following: • Numbers 0 through 9 • Upper case letters A through Z and lower case letters a through z • Special characters: period (.), hyphen (-), colon (:), at sign (@), space, backspace (to delete a character to the left), clear (CLR) to clear the entered text, comma (,) , and a slash (/) When you are entering letters, the first letter entered is automatically entered as UPPER case. The bottom left "arrow" on the screen is a Shift key. This allows you to change from UPPER to lower case and UPPER case shift lock. The keyboard features "wrap-around" capability. If you press repeatedly on the left or right arrow keys, the cursor will wrap-around to the letter on the opposite end of the row to speed up moving around the keyboard.