D-Link DWC-2000 User Manual - Page 106
Add New WDS Manage AP
View all D-Link DWC-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Section 4 - Advanced WLAN Configuration 2. Click Add New WDS Manage AP. 3. Complete the fields in the table below and click Save. Field WDS Managed Group ID Valid AP MAC Address Hardware Type String WDS AP MAC Address STP Priority Description Select the ID associated with the group to configure. MAC Address of the AP. Select the AP from the drop-down menu. Enter the WDS AP MAC address. Spanning Tree Priority for this AP. The STP priority is used only when spanning tree mode is enabled. The STP priority determines which AP is selected as the root of the spanning tree and which AP has preference over another AP when multiple equal cost paths exist in the topology. The lower value for the spanning tree priority means that the AP is more likely to be used for bridging data into the campus network. You should assign a lower priority to the APs connected to the wired network than to the satellite APs. The STP priority value is rounded down to a multiple of 4096. The range is 0 - 61440, and the default value is 36864. D-Link DWC-2000 User Manual 106