D-Link DWC-2000 User Manual - Page 84

Section 4 - Advanced WLAN Configuration 3. Enter the new primary address, new backup address and AP Profile. 4. Click Save. Field Description MAC Address MAC address of the access point. IP Address IP address of the access point. Time Since Last Update Time since any information has been received from this access point. Primary IP Address The IP address of the primary provisioned switch as reported by the AP. Backup IP Address The IP address of the backup provisioned switch as reported by the AP. Mutual Authentication Mode Shows whether the Mutual Authentication mode is currently enabled. The configured re‐provisioning mode in the AP, which is one of the following: Unmanaged AP Reprovisioning Mode • Enable - The AP can be reprovisioned when it is not managed. • Disable - The AP cannot be reprovisioned when it is not managed. AP Provisioning Status Status of the most recently issued AP provisioning command, which is one of the following: • Not Started - Provisioning has not been done for this AP. • Success - Provisioning finished successfully for this wireless controller. The AP Provisioning Status Table should reflect the latest provisioning configuration. • In Progress - Provisioning is executing for this AP. • Invalid Switch IP Address - Either primary or backup wireless controller IP address is not in the cluster or the mutual authentication mode is enabled and the primary wireless controller IP address is not specified. • Provisioning Rejected - AP is not managed and is configured not to accept provisioning data in unmanaged mode. • Timed Out - The last provisioning request timed out. Status of the last AP profile and X.509 Certificate distribution to the Primary and Backup switches. This status is changed as a result of the AP provisioning command. The X.509 certificate is sent to the primary and backup switches only if mutual AP Certificate and Profile Transmit Status authentication is enabled. The status is one of the following: • Not Started - No information for this AP has been sent to the primary and backup switch. • Success - AP Profile and X.509 Certificate is sent to Primary and Backup Switches. • Failed - The primary or backup switch wasn't in the cluster when this switch attempted to send the information. New Primary IP Address Enter the IP address of the wireless controller that should manage the AP. New Backup IP Address Enter the IP address of switch to which the AP should try to connect if it is unable to connect to the primary wireless controller. Profile Select an AP profile you want to use. D-Link DWC-2000 User Manual 84