Dell 1450 Dell Projector 1220/ Users Guide - Page 37
Normal mode operates at full power level. ECO mode operates at
View all Dell 1450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
POWER SETTINGS-Select and press to activate power settings. The power settings menu provides the following options: AUTO SHUTDOWN-By default, the projector is set to enter auto shutdown mode after 120 minutes of no activity. A warning message appears on screen showing a 60 seconds countdown before switching to auto shutdown mode. Press any button during the countdown period to stop the auto shutdown mode. You can also set a different delay period to enter auto shutdown mode. The delay period is the time you want the projector to wait without an input signal. If an input signal is not detected during the delay period, the projector turns off. To turn on the projector press the Power button. LAMP MODE-Allows you to select the Normal or ECO mode. Normal mode operates at full power level. ECO mode operates at a lower power level which may provide longer lamp life, quieter operation, and dimmer luminance output on the screen. LAMP HOUR RESET-Press and select the Confirm option to reset the lamp hour. POWER ON BEEP-Select On to enable the power on beep. Select Silent to disable the power on beep. Using Your Projector 37