Dell 1600n Multifunction Mono Laser Printer Dell Laser Multi-Function Printer - Page 89
Installing an Optional Tray 2, Removing the Memory
View all Dell 1600n Multifunction Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Removing the Memory 1 Follow steps 1 and 2 on page 76 to access the control board. 2 Push the levers at both ends of the DIMM slot away from the DIMM. 3 Place the DIMM in its original packaging or wrap it with paper and store it in a box. 4 Follow from step 8 on page 78. Installing an Optional Tray 2 You can increase the paper handling capacity of your multi-function printer by installing an optional Tray 2. This tray holds 250 sheets of paper. 1 Power the multi-function printer off and unplug all cables from the multi-function printer. 2 Remove the packing tape and the tape fastening the interface cable from the bottom of the optional Tray 2. Installing Options 79
Installing Options
79
Removing the Memory
1
Follow steps 1 and 2 on page 76 to access the control board.
2
Push the levers at both ends of the DIMM slot away from the DIMM.
3
Place the DIMM in its original packaging or wrap it with paper and store it in a box.
4
Follow from step 8 on page 78.
Installing an Optional Tray 2
You can increase the paper handling capacity of your multi-function printer by installing an
optional Tray 2. This tray holds 250 sheets of paper.
1
Power the multi-function printer off and unplug all cables from the multi-function
printer.
2
Remove the packing tape and the tape fastening the interface cable from the bottom
of the optional Tray 2.