Dell 3100cn Color Laser Printer User's Guide - Page 179
Current Ethernet Settings
View all Dell 3100cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Auto Refresh Interval Sets the time interval for refreshing the contents of the status display pages automatically from 15 to 600 seconds. NOTE: The auto refresh feature is effective for the contents of the Top Frame, Printer Status page, Job List page, and Completed Jobs page. Port Settings Purpose: To specify whether to enable or disable printing ports and management protocol features. Values: Ethernet Port Settings Ethernet Settings Auto 10BASE-T HalfDuplex 10BASE-T FullDuplex 100BASE-TX HalfDuplex 100BASE-TX FullDuplex Current Ethernet Settings MAC Address LPD Port9100 IPP*1 FTP SMB*1 NetWare*1 AppleTalk*1 E-Mail Alert SNMP Agent Detects Ethernet transmission rate and the duplex settings automatically. Selects 10Base-T Half-Duplex as the default value. Selects 10Base-T Full-Duplex as the default value. Selects 100Base-T Half-Duplex as the default value. Selects 100Base-T Full-Duplex as the default value. Displays the current settings of Ethernet. Displays the printer's MAC address. Select the check box to enable the LPD. Select the check box to enable the Port9100. Select the check box to enable the IPP port. Select the check box to enable the FTP port. Select the check box to enable the SMB. You can also configure the transport protocol to be used. TCP/IP and NetBEUI can be selected simultaneously as the transport protocol. Select the check box to enable the NetWare port. Select the check box to enable the AppleTalk port. Select the check box to enable the E-Mail Alert feature. Select the check box to enable the SNMP. You can also configure the transport protocol to be used. UDP and IPX can be selected simultaneously as the transport protocol. IPX is only available when the multiprotocol card is installed. *1 An optional multi protocol card is required to use. NOTE: The settings in the Port Settings item will be valid only when the printer is rebooted. When you change or set this item, click the Restart printer to apply new settings. button to apply new settings. TCP/IP Purpose: To configure the IP address, subnet mask, and gateway address of the printer. Values: TCP/IP Settings Host Name Specifies the host name up to 15 alphanumeric characters. The default name will remain valid if no entry is made.