Dell 3100cn Color Laser Printer User's Guide - Page 34
Ethernet, TCP/IP
View all Dell 3100cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Purpose: To print a list of all files that are stored as Secure and Proof Print in the RAM Disk. Network Use the Network menu to change printer settings affecting jobs sent to the printer through a network port. Ethernet Purpose: To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the printer is turned off and then on again. Values: Auto* Detects the Ethernet settings automatically. Uses 10base-T half-duplex. 10Base Half Uses 10base-T full-duplex. 10Base Full Uses 100base-TX half-duplex. 100Base Half Uses 100base-TX full-duplex. 100Base Full TCP/IP Purpose: To specify the TCP/IP settings. The change becomes effective after the printer is turned off and then on again. Values: Automatically sets the IP address. IP AddressSetup AutoIP* Uses BOOTP to set the IP address. BOOTP RARP Uses RARP to set the IP address. Uses DHCP to set the IP address. DHCP Enables the IP address entered on the operator panel. Panel IP Address Displays the IP address allocated to the printer by using the keys on the operator panel. Subnet Mask Displays the subnet mask. Gateway Address Displays the gateway address.