Dell 5110cn Color Laser Printer Service Manual - Page 39

Problem Other Error Message CTD Sensor Dirty 092-310 Flip Clean CTD Sensor Ready to Print 092-910 Flip Clean CTD Sensor Out of Memory 016-700 Flip Job too Large Press Set Disk Full 016-980 Flip Job too Large Press Set PCL Request 016-720 Flip Data Violation Press Set Invalid Job 016-799 Flip Data Violation Press Set Ready to Print 193-700 Flip non-Dell Toner Installed Invalid ID 016-383 Flip Data Violation Press set Range Chk Error 016-384 Flip Data Violation Press Set Header Error 016-385 Flip Data Violation Press Set Chapter 1 Troubleshooting Error Contents The CTD (ADC) sensor dustiness is detected. The output signal of the CTD (ADC) sensor does not reach the specified value at sensing the toner patch on the BTR ASSY. The CTD (ADC) sensor dustiness is detected. The output signal of the CTD (ADC) sensor does not reach the specified value at sensing the toner patch on the BTR ASSY. FIP to be referred FIP-58 FIP-58 Exceeds the memory capacity. The print data size exceeded the memory capacity of the printer. FIP-59 Exceeds the memory or the Hard Disk capacity. The print data size exceeded the memory or the hard disk capacity of the printer. FIP-60 PCL error occurs. The print data cannot be processed by PCL. FIP-61 Detects violation data for the print condition. The print data specifies paper type/size not available for the printer. FIP-62 The printer is in Custom Toner Mode. FIP-63 The ID of the downloaded file is invalid. FIP-64 The address of the write destination is invalid. FIP-64 The header information is invalid. FIP-64 1 - 22