Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 1038
switchShow, Allow XISL Use
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1038 highlights
2 switchShow switchShow Displays switch and port status. SYNOPSIS switchshow switchshow [-slot slot] -portname switchshow [-portcount |-iscsi | -qsfp] DESCRIPTION Use this command to display switch, blade, and port status information. Output may vary depending on the switch model. When used without operands, switchShow displays the following information: switchName Switch name. switchType Switch model and revision numbers. switchState Switch state: Online, Offline, Testing, or Faulty. When you issue the switchcfgPersistentDisable command followed by the switchEnable command, the switch state changes to, "Online (Temporary)". The switch remains in this state until you issue the switchcfgPersistentEnable command. switchMode Switch operation mode: Access Gateway (if AG is enabled). switchRole Switch role: Principal, Subordinate, or Disabled. switchDomain Switch domain ID: 1 to 239. switchId Switch embedded port D_ID. switchWwn Switch world wide name (WWN). switchBeacon Switch beaconing state: On or Off. zoning The name of the active zone is displayed in parentheses. Active only when Access Gateway mode is disabled. FC Router FC Router state: On or Off. FC Router BB Fabric ID The backbone fabric ID for FC routing. Fabric Name The name assigned to the fabric. The fabric name is set with the fabricName command. Allow XISL Use Allows the switch to use interswitch links (XILS) in the base fabric to carry traffic to this logical switch. Values are ON or OFF. 1010 Fabric OS Command Reference 53-1002746-01