Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 486
helloTo, rXmitTo, nCmdAcc, nInvCmd, nHloIn, nInvHlo, nLsuIn, attHloOut, nHloOut, attLsuOut, nLsuOut
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 486 highlights
2 interfaceShow NOTES OPERANDS helloTo rXmitTo nCmdAcc nInvCmd nHloIn nInvHlo nLsuIn nLsaIn attHloOut nHloOut attLsuOut nLsuOut attLsaOut nLsaOut Hello timeout value, in milliseconds. When this timeout expires, a Hello frame is sent to the neighbor switch through this port. Retransmission timeout value, in milliseconds. It is used to transmit topology information to the neighbor switch. If no acknowledgement is received within this value, the frame is retransmitted. Total number of commands accepted from the neighbor switch. Number includes Hellos, Link State Updates (LSUs), and LSAs. Number of invalid commands received from the neighbor switch. Usually commands with an FSPF version number higher than the one running on the local switch. Number of Hello frames received from the neighbor switch. Number of invalid Hello frames (Hello frames with invalid parameters) received from the neighbor switch. Number of LSUs received from the neighbor switch. Number of LSAs received from the neighbor switch. Number of attempted transmissions of Hello frames to the neighbor switch. Number of Hello frames transmitted to the neighbor switch. Number of attempted transmissions of LSUs to the neighbor switch. Number of LSUs transmitted to the neighbor switch. Number of attempted transmissions of LSAs to the neighbor switch. Number of LSAs transmitted to the neighbor switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: slot For bladed systems only, specify the slot number of the port to be displayed, followed by a slash (/). port Specify the number of the port to be displayed, relative to its slot for bladed systems. Use switchShow for a list of valid ports. This operand is optional; if omitted, the interface information for all ports is displayed. 458 Fabric OS Command Reference 53-1002746-01