Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 426
ethsw, disable, fcrCon iSCSI, iSNSC, fosconfig --show, fosconfig --disable fcr
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 426 highlights
2 fosConfig EXAMPLES ethsw --disable feature fcr iSCSI iSNSC vf ethsw --show Enables the Ethernet switch service on the switch. The Ethernet switch service is disabled by default. Enabling the Ethernet switch service does not disrupt the FC traffic. Disables a feature on the switch. Valid values for feature include the following: Disables the FC Routing service on the switch. All enabled EX_Ports and VEX_Ports on the switch must be offline for this command to succeed. To use this command to disable the FC Routing service only instead of disabling the switch, issue this command, then change the BB fabric ID using fcrConfigure. When disabling the FCR service, you may encounter the following system messages: "Please disable all EX/VEX_Ports first before running this command." This means that there were EX_Ports or VEX_Ports online when this command was issued. Take these ports offline and try the command again. "FC Routing service is already disabled" -This means that the FC Routing service is already disabled. Not supported in Fabric OS v7.0.0 or later. Not supported in Fabric OS v7.0.0 or later. Disables Virtual Fabrics on the switch. This command prompts for confirmation, because the chassis reboots after this command is executed. Disables the Ethernet switch service. Ethernet switching is disabled by default. This operation reboots the switch and is therefore disruptive. Displays the current operating status of features on the switch. To display the operating status of the services on a Brocade 6510: switch:admin> fosconfig --show FC Routing service: iSCSI service: iSNS client service: Virtual Fabric: Ethernet Switch Service: disabled Service not supported on this Platform Service not supported on this Platform enabled Service not supported on this Platform To disable the FC Routing service: switch:admin> fosconfig --disable fcr FC Routing service is disabled To enable the FC Routing service: switch:admin> fosconfig --enable fcr FC Routing service is enabled 398 Fabric OS Command Reference 53-1002746-01