Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 665
portshow iproute, portShow, portcfg iproute 8/xge1 delete
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 665 highlights
portCfg 2 2. Configure the interface for the nonlocal XGE port (xge1). switch:admin> portcfg ipif 8/xge1 create 1.1.1.0 \ 255.255.255.0 192.168.11.250 -x Operation Succeeded 3. The IP route will be available for circuits on VE ports 22-31. The output from portshow iproute for the same route shows the crossport tag. switch:admin> portshow iproute 8/xge0 Port: 8/xge0 IP Address Mask Gateway Metric Flags 2.2.2.0 255.255.255.128 192.168.10.251 0 U G S 2.2.2.0 255.255.255.0 192.168.10.250 0 U G S 192.168.10.0 255.255.255.0 * 0 UC 192.168.10.250 255.255.255.255 * 0 UHL 192.168.10.251 255.255.255.255 * 0 UHL 1.1.1.0 255.255.255.0 192.168.11.250 0 U G S (crossport) 192.168.11.0 255.255.255.0 * 0 U C (crossport) 192.168.11.250 255.255.255.255 * 0 U H L (crossport) To delete the crossport IP route: switch:admin> portcfg iproute 8/xge1 delete \ 1.1.1.0 255.255.255.0 -x Operation Succeeded To delete a static IP route using an IPv4 address: switch:admin> portcfg iproute ge0 delete \ 172.16.0.0 255.255.0.0 Operation Succeeded To create a network-wide permanent VLAN tag entry with a VLAN ID of 200 and an L2 CoS value of 5 (no destination address): switch:admin> portcfg vlantag ge2 add \ 192.168.2.10 200 5 Operation Succeeded To display the VLAN tag configuration (for an explanation of the flags, refer to portShow): switch:admin> portshow vlantag ge2 Port: ge2 Interface Address VlanId L2CoS Flags Destination Address 192.168.2.10 200 5 Perm Net 0.0.0.0 192.168.0.20 100 0 Perm 192.168.0.10 192.168.0.21 200 0 Perm 192.168.0.11 2000::20 300 0 Perm 2000::10 2000::21 400 0 Perm 2000::11 Fabric OS Command Reference 637 53-1002746-01