Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 403
zeroize, nowarn, showall, force fips, verify fips, disable, enable bootprom
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 403 highlights
fipsCfg 2 EXAMPLES --zeroize [-nowarn] Erases all passwords, shared secrets, private keys, etc. in the system. --show | --showall Displays the current FIPS configuration. --force fips This option enables FIPS mode even if prerequisites are not met, except under the following two conditions: • In a dual-CP system if HA is not in sync between the two CPs. • If selftests is in a disabled state. --verify fips Scans the prerequisites for enabling FIPS and print the failure/success cases. --disable | --enable bootprom [-nowarn] Disables or enables the Boot Programmable Read-Only Memory (Boot PROM) on the switch. Boot PROM access is blocked in FIPS mode. Disabling Boot PROM requires root permission. Enabling Boot PROM does not require root permission. To display the current FIPS configuration: switch:admin> fipscfg --show FIPS mode is : Disabled FIPS Selftests mode/status is : Disabled/None To enable selftests: switch admin> fipscfg --enable selftests You are enabling selftests. Do you want to continue? (yes, y, no, n) [no] : yes FIPS Selftests mode/status has been set to : Enabled/None To verify FIPS prerequisites: switch:admin> fipscfg --verify fips Standby firmware supports FIPS SELF tests check has passed Root account is enabled. Radius check has passed Authentication check has passed SNMP is in read only mode. Bootprom access is disabled. Firmwaredownload signature verification is enabled. cfgload.secure parameter value is 1. To enable FIPS after prerequisites have been met: switch:admin> fipscfg --enable fips You are enabling FIPS. Do you want to continue? (yes, y, no, n) [no] : yes FIPS mode has been set to : Enabled Please reboot the system switch:admin> fipscfg --show FIPS mode is : Enabled Fabric OS Command Reference 375 53-1002746-01