Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 352
fcrCon
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 352 highlights
2 fcrConfigure fcrConfigure Sets FC Router configuration parameters. SYNOPSIS fcrconfigure DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to configure FC Router parameters. This is an interactive command. Before you can execute this command, you must disable FC routing by using the fosConfig command and disable the switch with the switchDisable command. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command interactively prompts for the following parameter: Backbone Fabric ID A fabric ID uniquely identifies a fabric in FC Router configurations. The backbone fabric is the fabric attached to the U_Ports of the switch, for example, E_Ports or F_Ports. The backbone fabric ID must be unique across all fabrics connected to the FC Router. Use the switchShow command to display the current Backbone Fabric ID. To configure FC Router parameters: fcr:admin> fcrconfigure FC Router parameter set. to skip a parameter Please make sure new Backbone Fabric ID does \ not conflict with any configured EX-Port's Fabric ID Backbone fabric ID: (1-128)[128] fosConfig, switchDisable, switchEnable, switchShow 324 Fabric OS Command Reference 53-1002746-01