Dell Brocade 6510 Fabric OS Command Reference v7.1.0 - Page 365
fcrPhyDevShow, Device Exists in Fabric, Physical PID
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 365 highlights
fcrPhyDevShow 2 fcrPhyDevShow Displays the FC Router physical device information. SYNOPSIS fcrphydevshow [-a][-f FID][-w wwn][-c][-d] [-h] DESCRIPTION NOTES OPERANDS Use this command to display the physical (real) devices that are configured to be exported to other fabrics. A device is considered to be configured to be exported to another fabric if it is a member of an LSAN zone. The device is displayed only if it is discovered in the EX_Port-attached fabric and backbone fabric's name server (for instance, the device is online). Physical device information is available only for physical devices that exist in fabrics attached to EX_Ports of FC Routers on the same backbone fabric as the current FC Router. The default output displays only physical device information relevant to the current FC Router. Relevant physical devices include physical devices that are configured to be exported from fabrics attached to the current FC Router's EX_Ports. The physical devices are listed by fabric. The -f and -w operands allow searching for physical devices based on fabric ID or port world wide name. "No device found" is displayed if there is no physical device information available at the current FC Router. Each line of the output displays: Device Exists in Fabric The fabric in which the physical device exists. WWN The world wide name of the device port. Physical PID The port ID of the physical device. This port ID is only relevant on the fabric specified by the "Device Exists in Fabric" column. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: -a Displays all physical devices for all FC Routers in the same backbone fabric whether or not they are relevant to the current FC Router. -a -f FID Displays the physical devices in the specified fabric for all FC Routers in the same backbone fabric whether or not they are relevant to the current FC Router. -w wwn Displays the physical devices with the specified port WWN. -c Clears login-related counters. -d Displays the following login-related counters. Counters are cleared upon reboot or failover. login try The number of times the device attempted to log in. Fabric OS Command Reference 337 53-1002746-01